OILING:---It is necessary to oil the machine once a weak . If you use it

infrequently , then once a month should be sufficient . To oil throughly ,

remove the upper , needle plate , slide plate ,face plate , bobbin case ,

needle and presser foot . Read the instruction manual for location of

parts needing application of oil .One drop of oil is enough for each

point . while oiling turn the fly wheel back and front to help the oil

flow to the moving parts . After oiling the points on the head of the

machine till the machine head back to oil the points on the under

side . Before you close the machine run it slowly for several minutes

on on a weast piece of material and keep the material under the

presser foot. The fabric will absorbs the excess oil .